| DETAILED SPECS |
|
Engine |
Cummins model B3.3 65 HP 4 cylinder diesel engine |
Air Cleaner |
Dry Element with pre-cleaner |
Radiator |
Pressurized, heavy duty |
Radiator Screen |
Constructed of 1/2" expanded, flattened steel with steel mesh. |
Engine
Controls |
Mounted in clear view and reachable with ease. Gauges inlude - combination tachometer/hour meter, volt meter, temperature gauge and oil pressure gauge. Automatic shutdown for high temperature or low oil pressure. |
Engine Sheet Metal |
Engine is covered by custom sheet metal enclosure constructed of 14-gauge steel. Constructed of 1/2" expanded, flattened steel with steel mesh. The screen is hinged to allow for cleaning without powering down the engine. |
PTO |
Heavy duty 13" automotive style PTO and clutch. |
Drive Type |
Belt Drive with 3-groove power band. |
Trailer Chassis |
Heavy duty channel steel, formed and welded. Chassis is constructed of 3" x 8" tubular steel with a 1/4" wall thickness. |
Chassis Dimensions |
14CY- 119" high x 101" wide x 252" long
20CY- 119" high x 101" wide x 278" long
25CY- 119" high x 101" wide x 314" long
30CY- 119" high x 101" wide x 348" long |
Axles |
14CY - Dual 3.5" high speed towing axle rated at 16,000 pounds.
25CY - Dual 5" high speed towing axle rated at 24,000 pounds. |
Tires |
14CY - Four ST235-85-R16 Radial tires mounted on steel wheels
20,25 and 30CY - Eight LT9.50 x 16.5 tires mounted on steel wheels |
Tow Tongue |
Heavy duty 6" x 6" x 1/4" wall thickness tow bar with pinle hitch. |
Parking Jack |
Heavy duty 12,000 pound static capacity side wind jack. |
Trailer Lighting |
LED Stop and turn signals with turn signal indicators are standard. Dual LED strobes are mounted in the rear. |
Impeller |
28" diameter with six 3/8" thick blades. Constructed of abrasive resistant T-1 steel with a Brinell hardness exceeding 400 |
Blower
Housing |
Constructed of 11 gauge steel with 1/4" thick steel liners |
Intake Hose |
16" diameter x 100" long urethane hose. |
Hose Boom |
Hydraulic Hose Boom |
Hoist Hydraulics |
Gear driven hydraulic pump connected directly to the engine. The control valve for the hoist is located in the front of the unit for easy access. |
Dumping Hoist |
Uses a Crysteel scissor sytle hoist capable of dumping:
14CY 30,400 pounds.
20CY 43,000 pounds.
25/30CY 53,200 pounds.
|
Box Container |
14,20,25 OR 30 cubic yard capacity self dumping container constructed of 12-gauge steel with vented top and side hinge doors that lock in the open position for dumping. |
Vented Top Screens |
Two(14CY),Three(20,25,30CY) Easily removable 1/2" expanded steel mesh screens are located on the top of the box container. |
| Fuel Tank |
30 gallon all steel fuel tank |
| Paint |
All metal parts are thoroughly cleaned, primed, painted and dried separately. Each part is primed with a rust inhibitor primer and is painted with two coats of automotive quality paint. The parts are then assembled on the unit so that bolts, nuts, cables and grease fittings are not painted. |
© 2009 XtremeVac,
all rights reserved. |
*Specifications subject to change at any time without notice. Not responsible for typographical errors. |
